Model KL3RR is a remote sequencing key switch designed for mounting in 1U of standard 19 rack space. It operates on a 3-wire contact closure. For added security, keys are removable in either the On or Off position. Use this with PD11SS or any legacy ETA power sequencer.
The ETAS-KSW6 is a single gang electrical cover plate that works in conjunction with the ETA-ECS6RM system controller. The ETA-ECS6RM system controller can be remotely activated and each channel can be monitored using the ETA-KSW6 control panel. This panel can be placed several hundred feet away from theETA-ECS6RM controller. A Keyed On / Off switch is provided for security. There are six Bi-Color LEDs on the ETA-KSW6 panel. One LED for each of the six sequenced channels of the ETA-ECS6RM. These LEDs mimic the Channel Activation LEDs that are on the front of the ETA-ECS6RM panel. Wiring the ETA-KSW6 panel requires a RJ45 connector and 8 conductors. It is recommended to use CAT5 cable. The unit is 4.5"H x 2.75"W and weighs .25lbs.
The ETA-ECMRACEWY6 is designed to house up to six ETA-ECM20/M modules to provide up to six separate 20A AC legs for up to 120A of power distribution. There are four ½" and ¾" dual knockouts that support standard electrical conduit components for wiring 120V AC mains into the raceway housing from the electrical panel. If six sequenced sections are not needed,two ECM-3BP blank plates are included to cover unused ECM module slots. Other blank plates are available as an accessory item (ECM-3BP). The ETA-ECMRACEWY6 can be mounted into most racks that have at least 60" internal height and the Raceway has breakaway mounting tabs that make it convenient to secure the Raceway in most applications.
The ECM-3BP are additional Blank Plates for use in the ETA-ECMRACEWY6 and they come packaged in sets of three.
ETA also offers a wire kit of stranded 12 guage UL wire, model ECM-ACIN, for wiring the ETA-ECM20 Modules together plus additional length for wiring the incoming AC to an AC Mains panel. 140" of each color of Green, White and Black are included. Note: As a reference, it takes around a foot of wire between ETA-ECM20 modules if they are wired on the same incoming AC Main. It is highly recommended that you carefully measure the wire needed for the job. It may take more than one ECM-ACIN wire kit depending on many AC Mains and the distance from the AC Mains Panel.
The Atlas Power AP-GNL18 is an optional Gooseneck LED Lamp and works with any of the ETA Systems 12V DC XLR base mount connectors. The length of the gooseneck is 16".